- About Us
-
SBE members connected worldwide
Connecting more than 5,500 members in 114 chapters throughout the U.S. and Hong Kong.
-
- Membership
- Chapters
-
SBE Chapters
114 SBE chapters provide educational programs, professional recognition and networking opportunities to members.
-
- Certification
- Education
- Legislative/Advocacy
Government Relations
The SBE is an advocate on behalf of our members with regulators and legislators on issues that affect broadcast engineers and broadcast engineering.
- Frequency Coordination
- Jobs
- SBE Store
News & Headlines
Instructions to Download and Install Updated Security Firmware to EAS Units
October 31, 2019
(updated Nov. 5, 2019)
FEMA has released the new Federal Bridge certificate bundle for Sage and DASDEC users. The certification must be installed by Jan. 7, 2020, for the proper validation of CAP alert messages from IPAWS. The deadline was extended (from the original date of Nov. 8, 2019) after stations reported problems with installing the updates.
Sage Endec Users
Sage Alerting Systems will have the mandatory firmware rev 95 posted sometime on Nov. 1, 2019. To download the software, go to www.sagealertingsystems.com, and enter the serial number of your Sage unit. If you do not qualify for the free upgrade, you must first contact a Sage distributor, pay the required fee and they will unlock your serial number for the download.
Only Sage units with serial numbers between B417611 through B429999 qualify for free upgrade. You do not have to contact your vendor if your unit serial number is in that range.
You must download and install into the Sage unit before Jan. 7, 2020. If you have multiple Sage units, each download is keyed to the serial number. If you accidentally upload to the wrong Endec, nothing bad will happen, but the update will not succeed and you'll get an "update failed" message in the history on the Version page.
Download the firmware to a PC, log onto the Endec with a web browser, then click upload firmware.
DASDEC Users
The new FEMA IPAWS Certificate for DASDEC/One-Net is now posted: www.digitalalertsystems.com/DAS_pages/resources_fsb.html. Instructions and download link for the bundle are found at that site.
This is a free certificate update, which may be used for versions 3.x and v4.x software. If you are running version 2.6 software, this certificate file should function as well.
Separately, note that FEMA's upcoming TLS change is already supported in v3.x and v4.x software. If you are a DASDEC user, no further action is required for the TLS update. You do need to upload the certificate bundle for the new Federal Bridge Certificate by Jan. 7, 2020.
