The Society of Broadcast Engineers

The Association for Broadcast and Multimedia Technology Professionals

ATSC 3.0 Networking Module 1: Introduction to ATSC 3.0 Station Architecture, Networking Standards and the Physical Layer

Originally streamed May 22, 2019

Register Here

Overview

Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE presents this multi-part webinar series will provide a foundation in networking technology utilized in an ATSC 3.0 infrastructure.

Module 1: Introduction & Network Security Principals

ATSC 3.0 promises to revolutionize the television broadcast industry with integration of traditional over-the-air (OTA) signals and broadband delivered IP content. A key attribute of the ATSC 3.0 standard is the use of the Internet Protocol (IP) as the transport platform. The use of IP as a core transport platform creates the need for the broadcast engineer to have a high competency in networking technology to successfully design, build, and support the ATSC 3.0 infrastructure. This multi-part webinar series will provide a foundation in networking technology utilized in an ATSC 3.0 infrastructure.

ATSC 3.0 Module 1 Webinar Series

  • Module 1: Introduction to ATSC 3.0
  • Module 2: Ethernet Switching
  • Module 3: IP Routing

Wayne PecenaAbout Your Instructor: Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE

Instructing and the creator of the ATSC 3.0 Networking Series is Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE.  Wayne is the assistant director fo educational broadcast services in the Office of Information Technology at Texas A&M University.  In this position, he serves as the director of engineering of TTVN: The Enterprise Videoconference and Data Network serving the Texas A&M University System and Public Broadcast stations KAMU-TV and KAMU-FM serving the Brazos Valley area.  He has more than 35 years of broadcast telecommuncations experience and holds BS and MS degrees from Texas A&M University.  He is a licensed private pilot and holds Amateur Radio Operator License N1WP.

SBE Recertification Credit

The completion of this webinar from Webinars by SBE qualifies for 1 credit, identified under Category I of the Recertification Schedule for SBE Certifications. 

Registration and Pricing   

Registration for each module will be done separately. Click Register Now below, to register for Module 1.

SBE Members: $62

MemberPlus Members FREE

Non-Members: $92

SBE MemberPlus members – when registering, be sure to click on the MemberPlus link to activate your MemberPlus benefit to register for free. Not a SBE MemberPlus member? For more information, see below.

Register Here

Questions?  

If you have questions regarding this webinar, contact Cathy Orosz via email or by phone at 317-846-9000.

More information about registering using the SBE MemberPlus benefit

All Webinars by SBE are included at no additional cost for members who renew or join using the SBE MemberPlus membership option. Members can renew and newcomers may join online at the SBE website using the SBE MemberPlus option.

Access to the SBE webinars through the SBE MemberPlus program is limited to the MemberPlus-purchaser only.  You are not permitted to distribute, sell, copy, share, project or otherwise make the webinars available to any other individual or group without express written permission by the SBE.

Introduction to Successful Troubleshooting – Taking the Next Step – Module 2

October 20, 2022 | 2 p.m. ET The webinar will be a continuation of Module 1 with different troubleshooting scenarios. Each scenario demonstrates use of the troubleshooting process and will continue to utilize soft skills and techniques to take the...

READ MORE