The Society of Broadcast Engineers

The Association for Broadcast and Multimedia Technology Professionals

ATSC 3.0 Networking Module 2: Ethernet Switching

Originally streamed June 26, 2019

Register Here

Overview

Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE presents this multi-part webinar series will provide a foundation in networking technology utilized in an ATSC 3.0 infrastructure.

Module 2: Ethernet Switching

Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE presents Module 2 of this multi-part webinar series that will provide a foundation in networking technology utilized in an ATSC 3.0 infrastructure. In Module 2, Ethernet switching will be discussed in depth to include network architecture design for performance and security use of VLANs to provide network traffic isolation. ATSC 3.0 promises to revolutionize the television broadcast industry with integration of traditional over-the-air (OTA) signals and broadband delivered IP content.

ATSC 3.0 Networking Webinar Series

  • Module 1: Introduction to ATSC 3.0
  • Module 2: Ethernet Switching
  • Module 3: IP Routing

Wayne PecenaAbout Your Instructor: Wayne Pecena, CPBE, 8-VSB, AMD, DRB, CBNE

Wayne M. Pecena is the Assistant Director of Educational Broadcast    Services at Texas A&M University where he serves as Director of Engineering for public broadcast stations KAMU FM & TV. He holds BS & MS degrees from Texas A&M University and SBE CPBE (w/AMD, DRB, & 8-VSB) and CBNE certifications. Wayne serves as the SBE National Board Vice-President, Executive Committee Member, and chairs the Education Committee. He was named the SBE Educator of the Year in 2012, Radio World Engineer of the Year in 2014, named a SBE Fellow in 2016, and an IEEE-BTS Distinguished Lecturer in 2018.

SBE Recertification Credit

The completion of this webinar from Webinars by SBE qualifies for 1 credit, identified under Category I of the Recertification Schedule for SBE Certifications. 

Registration and Pricing   

Registration for each module will be done separately. Click Register Now below, to register for Module 1.

SBE Members: $62

MemberPlus Members FREE

Non-Members: $92

SBE MemberPlus members – when registering, be sure to click on the MemberPlus link to activate your MemberPlus benefit to register for free. Not a SBE MemberPlus member? For more information, see below.

Register Here

Questions?  

If you have questions regarding this webinar, contact Cathy Orosz via email or by phone at 317-846-9000.

More information about registering using the SBE MemberPlus benefit

All Webinars by SBE are included at no additional cost for members who renew or join using the SBE MemberPlus membership option.  Members can renew and newcomers may join online at the SBE website using the SBE MemberPlus option.

Access to the SBE webinars through the SBE MemberPlus program is limited to the MemberPlus-purchaser only.  You are not permitted to distribute, sell, copy, share, project or otherwise make the webinars available to any other individual or group without express written permission by the SBE.

Back to Basics – Network Design & Configuration – Part 2

October 17, 2023 | 2 p.m. ET The "Back to the Basics - Network Design & Configuration" webinar series provides an understanding of the fundamentals required in the design of, implementation of and support of an IP network in a...

READ MORE

Applied RF Basics – Module 1 – Medium Wave/AM Radio Systems

October 26, 2023 | 2 p.m. ET The four-part Applied RF Series kicks off with Module 1 - Medium Wave/AM Radio Systems. This session will look at what an AM signal consists of, how it’s built and different modulation techniques to...

READ MORE

Applied RF Basics – Module 2 – VHF/FM Radio Systems

November 16, 2023 | 2 p.m. ET The four-part Applied RF Series continues with Module 2 - VHF/FM Radio Systems. This session will look at the FM signal in more detail, discussing the various exciters and amplifiers, halfwave vs quarter...

READ MORE